This model loads Three.js r128 from a local vendor/ folder
(vendor/three.min.js, sibling or parent). No network copy is ever
fetched. Keep the vendor folder next to this file. If every 3D tab
shows nothing, the browser WebGL context cap is the usual cause — close other
3D tabs and check hardware acceleration.
PRIVATE PREVIEW — RESERVATION ACCESS ONLY
STEADY EDDIEPHYSICAL AUTONOMY SYSTEMS
COMPACT TRACK & SKID STEER FAMILY — 3D DEPLOYMENT & SIMULATION
SE-3D-300 · R1.0
SIMULATION — schematic geometry, illustrative colour. No built hardware is depicted or implied.
—
—
—
Human decision required. Press PLAY instead to decline and hold at SE-0.
THE NUMBERS — AN HONEST DATA PANEL
Everything on this page is stated plainly: what is real, what is schematic, and
what is simply not published yet. Nothing below is padded and nothing is invented.
WHAT THIS FILM IS
DOCUMENT
SE-3D-300 · R1.0 · 2026-08-16 · interactive 3D simulation
Not published in this preview. A per-model pack list for this family exists in engineering, not in marketing — no count is invented here.
DUTY SHOWN
General compact-machine work only: site prep and fine grading, material handling in a tight site, attachment work (bucket / forks), backfilling. No specialty vertical is depicted.
Demonstrated — only behind the human AUTHORIZE gate. REVOKE is instant.
SE-2 … SE-5
LOCKED. Each rung requires validation and a fresh human authorization. None is shown operating, here or anywhere.
WHAT IS REAL
THE DOCTRINE
AI plans. Rules govern. Humans authorize. Safety has veto. Upgrade needs a human; downgrade is instant and needs no gate.
THE SEQUENCE
Install dock once → deploy Eddie when required → engage actuators on the stock controls → SE-0 → human gate → SE-1 → remove when not required. The order is the product.
PHYSICAL ACTUATION
Eddie drives the same twin joysticks and pedals a person would — never the machine’s electronics. No CAN, no ECU, no firmware integration, ever. No ROPS/FOPS or cab structural modification, ever.
SCALE INTENT
1 world unit = 1 metre; the 1.8 m crew figure is true scale. That figure is the only calibrated object in the scene.
WHAT IS SCHEMATIC
ALL GEOMETRY
Machine, dock, Eddie, actuators, site — boxy, procedural, representative of a class, not of any make or model.
ALL COLOUR
Generic North-American construction yellow. No OEM livery or trade dress is reproduced. SE red marks retrofit hardware only.
FIELDS & ZONES
Stop field, warning field, geofence and exclusion-zone sizes in EYE IN THE SKY are illustrative. Real envelopes are set per machine and per site plan — none is published here.
TELEMETRY & TIMING
The status strip, cycle motions and all timings are illustrative animation, not recorded machine data.
WHAT EDDIE TOUCHES — AND WHAT IT NEVER TOUCHES
TOUCHES
The twin SJC joysticks, the pedals, and nothing else — the same grips and pads a human operator uses. Physical actuation only.
NEVER TOUCHES
CAN bus. ECU. Firmware. Wiring harness. Hydraulic circuits. ROPS/FOPS or any cab structure. Not on any rung of the ladder, not ever.
ALWAYS IN PLACE
The human controls. A person can sit down and drive the moment Eddie is out — and the dock alone never impedes normal operation.
COLOUR KEY — SEMANTIC, NOT COSMETIC
YELLOW / DARK GREY / STEEL
The host machine — generic North-American construction yellow. Untouched by the retrofit. Not any OEM’s livery.
RED
Steady Eddie hardware only: dock, Eddie, actuators. If it is red, SE added it; if it is not red, SE did not.
ORANGE / AMBER
Site safety furniture and the warning field. Earth tones are the site itself.
THE SIX VIEWS
THE FILM
The deployment narrative — dock, Eddie, engage, SE-0, the human gate, SE-1, removal.
The whole proposition — many docks, one Eddie, one envelope, the locked ladder.
THE NUMBERS
This panel. Keys 1–6 switch views; free orbit works everywhere.
NO DIMENSION SHOWN ANYWHERE IN THIS FILM IS A CERTIFIED ENGINEERING DIMENSION.
SIMULATION — SCHEMATIC GEOMETRY, ILLUSTRATIVE COLOUR. NO BUILT HARDWARE IS DEPICTED OR IMPLIED.
PATENT PENDING. NOT AFFILIATED WITH OR ENDORSED BY ANY OEM.
STEADY EDDIE · PHYSICAL AUTONOMY SYSTEMS
COMPACT TRACK & SKID STEER
SE-3D-300 · 3D DEPLOYMENT & SIMULATION · R1.0
A class-accurate schematic compact track loader, then the full Steady Eddie deployment sequence. Dock installs once and stays. Eddie deploys when
required and is removed when not. The mode ladder climbs only through a human
authorization gate; downgrade is instant.
SIMULATION — schematic geometry. No built hardware is depicted or implied.
DRAG — ORBIT · WHEEL / PINCH — ZOOM · RIGHT-DRAG — PAN
SPACE — PLAY/PAUSE · ARROW KEYS — STEP THE SEQUENCE
VIEWS — THE FILM · THE MACHINE · WORK AREA · EYE IN THE SKY · THE PROGRAM · THE NUMBERS
SEQUENCE COMPLETE
DOCK STAYS. EDDIE MOVES.
The machine is back to human-only — same controls, same machine.
The dock waits, empty, for the next deployment. Higher modes SE-2…SE-5 stay
locked: each requires validation and a fresh human authorization.
AI plans. Rules govern. Humans authorize. Safety has veto.